Page tree
Skip to end of metadata
Go to start of metadata

This document is for a previous release of cPanel & WHM. To view our latest documentation, visit our Home page.

For cPanel & WHM 11.40

( Home >> Server Configuration >> Tweak Settings )

 

Initial default/catch-all forwarder destination

This item allows you to select the initial forwarding destination for new accounts’ catch-all/default addresses.

Remember:

Users may later modify this value for themselves in the  Default Address  interface in cPanel.

 

The catch-all or default address handles email sent to nonexistent users on your server's domains. Because a domain may receive a large number of spam messages that are sent to nonexistent users, if you opt to process such mail it can cost you server resources.

To make your selection, click the button that corresponds to the option you wish to use.

You may choose:

  • System account (default) — Unroutable mail will be forwarded to the cPanel user’s main email account. If you choose this option, this account will mainly collect spam.
  • Fail — Discards the message and sends a notification to the sender. This is usually the best choice if you receive mail attacks.
  • Blackhole — Downloads the message, then discards it.

 

Discard FormMail-clone message with bcc:

This item allows you to select whether to silently discard FormMail-clone messages with a bcc: header in the subject line. Such messages are typically spam.

Click the button that corresponds to the option you wish to select. This value defaults to On.

 

Mail authentication via domain owner password

This option allows you to specify whether the website owner’s password can be used to access any email address that the owner created within the account.

Click the button that corresponds to the option you wish to select. This value defaults to Off.

 

Include mailman in disk usage calculations

This option allows you to decide whether Mailman mailing lists should be included in cPanel's calculations.

Click the button that corresponds to the option you wish to select. This value defaults to On.

 

Email delivery retry time

This item allows you to specify how many minutes that your mail server should wait before it attempts to redeliver a message after the message delivery fails.

To specify a new time, click the button next to the text box and enter the new time. This value defaults to 60 minutes.

 

Track email origin via X-Source email headers

This item allows you to select whether to track the origins of messages sent through your mail server. This feature adds X-Source headers to email messages.

Click the button that corresponds to the option you wish to select. This value defaults to On.

Note:

This feature requires  Exim version 4.34 or later.

 

Max hourly emails per domain

This item allows you to specify the maximum number of emails any domain can send per hour.

To specify a new value, perform the following steps:

  1. Click the button next to the text box.
  2. Enter the value that you wish to set.

This value defaults to Unlimited.

 

Warning:

This setting will not override the following parameters in packages or users:

  • Maximum Hourly Email by Domain Relayed  
  • Maximum percentage of failed or deferred messages a domain may send per hour

 

 

The percentage of email messages (above the domain's hourly maximum) to queue and retry for delivery.

After a domain reaches its limit for outgoing messages per hour, this setting allows you to queue additional outgoing messages for later delivery.

For example, if you set this value to 125, then after the domain reaches its hourly limit, Exim will queue any additional messages, up to 125% of the Max hourly emails per domain value. After the account reaches 125% of the Max hourly emails per domain value, any additional outgoing messages are forced to fail.

To force failure of all outgoing messages after the domain has reached its limit, set this option to 100.

 

Count mailman deliveries towards a domain's Max hourly emails

This option allows you to count messages that are sent to Mailman mailing lists against an account's Max hourly emails per domain limit, set above. By default, this setting is Off.

Note:

This setting should remain  Off  if you wish to accommodate users with large Mailman mailing lists. If you turn this setting  On , you may encounter issues with  mailing list  subscribers who do not receive messages.

 

Maximum percentage of failed or deferred messages a domain may send per hour

This option allows you to specify the maximum percentage of failed or deferred messages a that domain can send. If the domain exceeds the limit, your server will temporarily block outgoing mail from that domain. The system examines all outgoing and local mail over the previous hour to determine whether the domain exceeds the limit. When a domain exceeds the limit, the domain cannot send mail until the domain no longer exceeds the limit.

To configure this option, click the button next to the available text box and specify the percentage you wish to use. This item is set to unlimited by default.

You can also configure this option for user accounts and account packages.

 

Restrict outgoing SMTP to root, exim, and mailman

Only allow the rootexim, and mailman users to send email messages. Enable this option to prevent other users on the system from sending mail. When this option is enabled, scripts and email users need to use the sendmail binary to send mail instead of using direct sockets access.

Click the button that corresponds to the option you wish to select. This value defaults to Off.

 

Prevent “nobody” from sending mail

This item allows you to deny the system user nobody  the ability to send mail to a remote address.

Click the button that corresponds to the value you wish to select. The default value for this item is Off.

Remember:

PHP and CGI scripts generally run as nobody. To use a PHP or CGI script to send mail, enable either  suEXEC or mod_php in your Apache configuration.

 

Add X-PopBeforeSMTP header for mail sent via POP-before-SMTP

Note:

This item requires  Exim  4.34-30+.

POP before SMTP is an email protocol that allows users to check email from different IP addresses without the need to log in repeatedly.

Enable this setting to require the mail server to append a list to the X-PopBeforeSMTP headers of all of that user's outgoing messages. This list will contain all of the email addresses that a user checks with POP before  SMTP  

To make your selection, click the button that corresponds to the option you wish to use. The default value for this item is Off.

Important:

 We recommend that you do not enable this option because it may compromise the privacy of your users.

 

Enable BoxTrapper spam trap

This item allows you to enable BoxTrapper. BoxTrapper is a spam prevention system that uses black-, white-, and ignore lists and an automated response-verification system.

To disable BoxTrapper, click Off. By default, BoxTrapper is On.

 

Enable Email Archiving support

This item allows you to enable or disable Email Archiving support. The Email Archiving feature allows you to keep a copy of each email sent to and from your server. An email is immediately archived when the server receives the message. This action takes place before any filters are applied to the message.

Emails classified as spam and non-spam are archived. If you enable this feature, the amount of disk space that mail uses will double.

To enable this item, click On. By default, this item is Off.

 

Enable Horde Webmail

This item allows you to enable the Horde webmail client. Webmail allows cPanel users to access their email accounts with an Internet connection and a web browser.

To disable the Horde webmail client, click Off. By default, this item is On.

 

Enable RoundCube webmail

This item allows you to enable the RoundCube webmail client. Webmail allows cPanel users to access their email accounts with an Internet connection and a web browser.

To disable the RoundCube webmail client, click Off. By default, this item’s value is set to On.

 

Enable the SpamAssassin spam filter

Warning:

If you make changes to SpamAssassin's configuration, you must run the following script for your changes to take effect:  /usr/bin/sa-compile

 

SpamAssassin is a spam filtration program that scores incoming email and checks that score against a predefined limit. If the spam score exceeds this limit, the server will take an action that the domain owner has specified in the cPanel SpamAssassin interface. You may discard mail or place it in a special folder (see below).

To disable SpamAssassin, click Off. By default, this item’s value is set to On.

For more information, see Apache's SpamAssassin website .  


Enable SpamAssassin Spam Box delivery for messages marked as spam (user configurable)

This item allows you to enable SpamAssassin’s spam box feature. The spam box, when enabled, can receive incoming mail that was marked as spam by SpamAssassin. This can be useful for users who have received a message that was falsely flagged as spam.

To enable SpamAssassin’s spam box feature, click On. By default, this feature is Off.

 

Enable SquirrelMail webmail

This item allows you to enable the SquirrelMail webmail client. Webmail allows cPanel users to access their email accounts using an Internet connection and a web browser.

To disable the SquirrelMail webmail client, click Off. By default, this feature is On.

 

Prefix “mail.” onto Mailman URLs

This item allows you to specify whether Mailman URLs on your server should be prefixed with mail.

Click the button that corresponds to the option you wish to use. This value defaults to Off.

 

Default user-defined quota value for new email accounts

This item allows you to set the default quota that will appear in your users' Email Accounts interface in cPanel (Home >> Mail >> Email Accounts).

To set a new value, click the button next to the text box and enter the desired default value. This value defaults to 250 megabytes. The maximum value is 2,048 MB.

 

Default quota option for new email accounts

This item allows you to set the quota option that is preselected in your users' Email Accounts interface in cPanel (Home >> Mail >> Email Accounts).

To change the default option, click the button that corresponds to the option you wish to select. This value defaults to User-defined.