<< Step 2: Setup Networking

Step 4: Nameservers >> 

Step 1:

Agreement

Step 2:

Setup Networking

Step 3:

Set Up IP Addresses

Step 4:

Nameservers

Step 5:

Services

Step 6:

Set Up Quotas

 

 

Set Up IP Addresses

This section allows you to add IP addresses to your server.

Your server must have at least one IP address, which will function as the primary IP address of your server. If you do not have an IP address, visitors cannot access your server.

If you do not wish to enter additional IP addresses, click Skip This Step and Use Default Settings to proceed to Step 4: Nameservers.

Add New IP Address(es)

To add IP addresses, perform the following steps:

  1. In the IP Address(es) to Add text box, enter your server's IP addresses. 

    Use CIDR notation to add multiple IP addresses simultaneously. For more information, refer to the Quick CIDR Reference Table to the right of the interface.

  2. In the Subnet Mask text box, enter the appropriate subnet mask for your range of IP addresses.

    This value defaults to 255.255.255.0.

  3. Check to ensure that the displayed Network/Ethernet Device is correct (for example, eth0).

  4. Click Add IP(s) to continue to Step 4: Nameservers.

Current IP Addresses

The Current IP Addresses table displays the following information and options for you server's currently configured IP addresses.

ColumnDescription
InterfaceThe network device for that IP address (for example, eth0) .
IP

The IP address.

If your server uses 1:1 NAT, the interface displays Local IP and Public IP columns in place of the IP column.

Notes

This column indicates, for example, whether the IP address is a shared IP address, or whether the IP address is reserved.

ActionsIf the server is not currently in use, the Remove option displays. Click Remove to remove the IP address from your server.

 

 

 << Step 2: Setup Networking

Step 4: Nameservers >>